Self Prime 110V AC 16GPM Oil Transfer Pump Fuel Diesel Kerosene Biodiesel Pumps. The primary usage of this pump is to fueling vehicle or transfering fuel to gaddy fuel tank. As pump operating it will build pressure up to 44 psi max and it will disable itself. No bypass is needed as the pump will not damage itself when the oil flow is stopped (usually by a nozzel) The pump is not design for continous running, should not be left on for a long period of time, as it will wear down the vanes inside the pump, but it is ok for normal usage.
Flow Rate: 20-60L/Min (5.25-15.75 GPM); Max Pressure: 44PSI (3Bar). Suction Height: 5m (16ft) ; max Lift: 10m 32ft.
Continous Duty Cycle' Contruction: Cast Iron. Motor: 110V AC 370Watts 60hz Self Priming. Induction Motor with aluminum casing, Built in Filter for Easily accessible cleaning, With self priming pump and bypass valve. Motor: 110V AC 550Watts 60hz Self Priming. Flow Rate: 20-60L/Min (5.25-15.75 GPM). 5" x 9-3/8" x 6-1/4 H.Note:Tranfering light fuel pumping applications such as diesel fuel, biodiesel and kerosene. This pump cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil.
This pump is not recommended for use on gasoline. This pump is not anti-explosive. 1 pc Fuel pump 2pc straight hose barb fittings with Oring (NPT fittings can be made to fit when using yellow teflon tape). We are not responsible for undeliverable address.
Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available.
No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! This item is in the category "Business & Industrial\Fuel & Energy\Alternative Fuel & Energy\Biodiesel Equipment". The seller is "chargerangel" and is located in this country: US. This item can be shipped to United States.