Diesel Oil Fuel

Rubber Fuel Line Automotive Oil Diesel Push On Hose Braided Replace 12AN(3/4ID)

Rubber Fuel Line Automotive Oil Diesel Push On Hose Braided Replace 12AN(3/4ID)

Rubber Fuel Line Automotive Oil Diesel Push On Hose Braided Replace 12AN(3/4ID)

The inside of the hose is a hard material that will not deteriorate from the ethanol, and it will stay good and firm when used on a fuel injected motor. Nylon Braided NBR Rubber Fuel Hose Working Temperature Range: -40°F to +257°F, Maximum Working pressure: 290 PSI, Burst pressure: 870 PSI. Fuel line can work with diesel/ biodiesel/ gasoline/ Oil/ grease/ water and air, etc. Replacement for old leaking/damaged & needed hoses, replacing all rubber fuel line, rebuilt the carburetor, replace weathered and aged tubes, for emergency, Replace evap system. Ideal for transfer of petroleum products fuel lines for small engines.

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Push on / lock hose designed for conveying gasoline, diesel, and bio-diesel fuels in cars, trucks, buses, etc.

Designed for conveying gasoline, diesel, and biodiesel fuels in cars, trucks, buses, small engine etc. Withstands oil, grease, abrasion, and ozone. Black Nitrile tube and Nitrile/PVC cover is constructed with a two spiral polyester reinforcement that provides a long, trouble-free service life. Low temperature resistant and non hardening It adopts advanced synthetic materials, which will not harden and age under the environment of - 30? High pressure resistant explosion-proof pipe Reinforced Fiber thread and special weaving technology are adopted to reduce the expansibility of the hose, so it is more resistant to high pressure and stronger Corrosion and aging resistance It is processed with special formula and high-grade synthetic oil resistant glue, which is resistant to diesel, gasoline, methanol, kerosene and other oils and fats Embedded wire in inner wall The fiber woven net (bulletproof clothing material) embedded in the pipe ensures the flexibility and compression resistance of the hose The outer wall of oil pipe is smooth The outer wall adopts composite rubber, which is aging resistant Inner wall rubber Imported nitrile rubber, oil resistant and corrosion resistant. A multipurpose fuel hose that can be used as a fuel line PCV connection, emission control line or fuel return line, fuel vent tubing, use for oil catch can to redirect blow by gases from the PCV system on truck, for NG heater, Evap system, fueled my tank, to extend fuel line, as replacement hose and an adapter for a breather tube, Works great on fuel cell gas line, to replace an old oil line for the outdrive assembly, to reroute fuel line from pump to carb, to build the system needed to clean diesel fuel injectors. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Fuel Systems\Hoses, Lines & Fittings".

The seller is "trustmall168" and is located in this country: US. This item can be shipped to United States.

  • Length: 9ft
  • Application6: For Transfer of Petroleum Products Fuel Lines for Small Engines
  • Application5: Widely Used in Fuel System,Oil Cooling,Steam Emission,PCV System
  • Warranty: 1 Year
  • Size: 1/4\
  • Color: Black
  • Manufacturer Part Number: Fuel Line Fuel Hose Fuel Pipe NBR
  • Fluid Type: Petroleum Based Gas
  • Placement on Vehicle: Engine Compartment
  • Brand: Car Elements
  • Type: Fuel Line Oil Line Gas Line Diesel Line NBR Rubber
  • Application 4: Can Work with Diesel/Biodiesel/Gasoline/Oil/Grease/Water and Air
  • Application 3: Replacing All Rubber Fuel Line,Rebuilt the Carburetor
  • Application 2: Replace for Old Leaking/Damaged&Needed Hoses,Weathered&Aged Tubes
  • Features: Petroleum Resistant, Reinforced, Easy to Bend and Install
  • Surface Finish: NBR Rubber
  • Application: Coolant,Diesel, Oil,Hydraulic Oil,Pump Air,Air and Fuel etc.


    Rubber Fuel Line Automotive Oil Diesel Push On Hose Braided Replace 12AN(3/4ID)